ARONSON HD-240A
Year: 1968
Serial #: 6860
Type: WELDING POSITIONER
ARONSON, 2 AXIS GEAR DRIVEN WELDING POSITIONER.
THE TABLE SURFACE CAN BE ROTATED AND TILTED FOR EASE OF WELDING POSITIONS.
SHOWN AT 68 INCHES TO FLOOR.
ARONSON ========1-716-662-4497
ARONSON ORD # 25-19522
ARONSON DRAWING # HD240-60
INTERESTED PARTIES ARE ENCOURAGED TO INSPECT EQUIPMENT BEFORE PURCHASE, OR WAIVE INSPECTION. ALSO TO CALL ARONSON FOR FURTHER SPECIFICATIONS FOR THIS EQUIPMENT.
SOLD "AS IS" "WHERE IS", NO WARRANTY EXPRESSED OR IMPLIED, NO RETURNS ALLOWED. IT IS THE BUYERS RESPONSIBILITY TO INSURE THE EQUIPMENT MEETS CURRENT OSHA REQUIREMENTS FOR SAFTEY. THE SELLER IS NOT RESPONSIBLE FOR THE USE OR MISS-USE OF THIS EQUIPMENT.
| Description |
Specifications |
| MAX LOAD TORQUE |
288000 LB IN. ROT. |
| MAX LOAD TORQUE |
504000 LB. IN. TILT |
| TABLE SIZE |
54" X 54" |
| DIMENSIONS |
104" L-R, 56" F-B, 96" H |
| APPROXIMATE WEIGHT |
7,500 LBS. |
| TABLE DRIVE |
POWER SCR .016 TO .66 RPM |
| POWER TILT |
135 DEGREES |
| ADJUSTABLE HEIGHT |
6" INCREMENTS (MANUAL) |
| DISTANCE FLOOR TO TABLE IN VERTICAL POSITION |
52" TO 84" MAX. |
| RAPID RPM ON TABLE |
YES |
| PENDANT CONTROL |
YES |
| TILTING MOTOR HP. |
7 1/2 HP. |
| ROTATION MOTOR HP. |
5 HP. |
| VOLTAGE |
440 VOLTS 3 PH. 60 HZ. |
| FULL LOAD AMPS |
36 AMPS. |
| CAPACITY AT 12"TO FACE OF TABLE |
24,000 |
| AT 18" |
18,500 |
| AT 24" |
15,000 |
| AT 30" |
13,000 |
| AT 36" |
11,000 |
| AT 42 |
9,800 |
| AT 48" |
8,800 |
| AT 54" |
8,000 |
| AT 60" |
7,300 |
|
