J R I INDUSTRIES TL-25
Year: 2004
Serial #: 01819
Type: PARTS CLEANERS
TL-25 TOP LOADING AUTOMATIC PARTS CLEANER, PARTS WASHER.
REVOLVING BASKET WITH ELECTRIC HEAT.
J R I INDUSTRIES, 2958 EAST DIVISION, SPRINGFIELD, MISSOURI, 65803
1-800-524-9274
THIS UNIT HAD VERY LITTLE USE AND IS IN LIKE NEW CONDITION.
OUR PRICE IS $3,500.00 PLUS $200.00 FOR SKIDING AND PREPERATION FOR SHIPPING, PLUS FREIGHT TO YOUR LOCATION.
THIS UNIT SELLS FOR $6,060.00 AS OF 3-10-09
| Description |
Specifications |
| ROTATING BASKET |
25" DIAMETER |
| INSIDE WORKING HEIGHT |
32" HIGH |
| LOAD CAPACITY |
1000 LBS |
| PUMP MOTOR |
3 HP, 50 GPM @ 45PSI PUMP AMPS = 17.0 AMPS |
| PUMP PRESSURE |
52 PSI |
| PUMP OUTPUT |
52 PSI AT 35 GPM |
| SOLUTION TANK CAPACITY |
80 GALLON MILD STEEL TANK |
| INSIDE OF CABINET SIZES |
30" X 30" |
| VOLTAGE |
230 VOLTS 1 PH. TOTAL AMPERAGE = 56.2 AMPS. |
| OVERALL DIMENSIONS |
40" L X 38" W X 46" LONG X 58" HIGH (LID CLOSED) |
| WEIGHT CAPACITY |
1000 LBS. |
| ELECTRIC HEAT |
9 KW AMPS = 39.2 AMPS |
| ELECTRICAL CONTROLS |
INDUSTRIAL |
| TURNTABLE DRIVE |
GEAR DRIVEN |
| LID SEAL |
MECHANICAL |
| NOZZLES |
STAINLESS STEEL W/BUSHINGS |
| TANK MATERIAL |
12 GAGE MILD STEEL, DRAIN 2" |
| LOADING/UNLOADING |
MANUAL |
| PROCESS TEMPERATURE |
WASH 140 DEG. F. |
| SAFETY |
MAY OR MAY NOT MEET FEDERAL AND OSHA STANDARDS |
| OPTION SO-100 |
LOW WATER SHUT OFF TO PROTECT THE HEATER |
| OPTION OS-100SS |
12" ST STL DISK TYPE OIL SKIMMER REMOVES OIL FROM THE SOLUTION TANK |
| OPTION SW-30 |
SWING AWAY SPRAY BAR |
| OPTION T-100 |
ONE CHANNEL TIMMER, BATTERY BACK UP,SWITCHING TIME AS SHORT AS 1 MIN. |
|
